Diamond Eco Ceramic materials for ceramics.
Eco for ceramic - ceramic tiles, glazed tiles, for clean cutting edge.
Innovative cutting technology. Bosch’s new innovative Ceramic Turbo Disc ensures swift cutting speed with chip free edges, allowing users to optimise their cutting speed and efficiency.
The right disc for the highest demands with regard to accurate, chip-free cuts with considerably less risk of tile breakage
The thin cutting rim can lead to high accurate cutting
Extra clean cutting quality without broken edges, long lifetime in all tiles
Safety product according to EN norm 13236
For clean cut edges in ceramic tiles. The low-cost solution for all-round use in tiles.
Code: 2 608 615 026
Tool Compatible With Surfaces: Ceramic
Genuine Bosch Diamond Disc for Ceramic / Tiles
105mm Diameter, Continuous type
For Ceramic Tiles and Glazed Tiles
For clean cutting edge
Max. speed: 14,500min-1
Bore diameter Wet: 20mm / Dry: 16mm
Cutting width: 1.9mm
Section height: 7mm
For ceramic tiles, glazed tiles, For clean cutting edge
To set up or to change disc, pull plug out.
Use the correct cutting blade for the various material
Clean flange, spindle and cutting blade
Flanges should have at least 1/3 of cutting disc diameter
Diameter of spindle, and bore hole of the cutting blade must be the same. Bore hole of the cutting blade must not be enlarged
Arrow on the cutting blade and the direction of rotation of the machine msut be corresponding
Maximum rotation of the machine must not be faster as the allowed rotation of the cutting blade
Only work on right angle and on straight line. Curve cuts and edging may cause tears in the center or breaks of segments.
Avoid harsh starts and tilting blade while cutting. Do not overstrain the cutting blade. Pausing occasionally for cooling is essential.
When not in use remove disc
To avoid damages, remove diamond blades from the machine during transit. Always war protective goggles, protective gloves, face mask, safety shoes and working clothes.
Protection guard, cutting guide and dust extraction to be used whilst working
Remove reduction ring for marble cutter application
Use reduction ring for angle grinder application
Only dry cutting for angle grinder application
1 x ECO Ceramic Diamond Cutting Disc 4" For Ceramic / Tiles