For wet cutting, the electro-tool must be connected by means of an isolation transformer with a permanently installed socket without protective earth conductor
To set up or to change disc, pull plug out.
Use the correct cutting blade for the various material
Clean flange, spindle and cutting blade
Flanges should have at least 1/3 of cutting disc diameter
Diameter of spindle, and bore hole of the cutting blade must be the same. Bore hole of the cutting blade must not be enlarged
Arrow on the cutting blade and the direction of rotation of the machine must be corresponding
Maximum rotation of the machine must not be faster as the allowed rotation of the cutting blade
Only work on right angle and on straight line. Curve cuts and edging may cause tears in the centre or breaks off segments.
Avoid harsh starts and tilting blade while cutting. Do not overstrain the cutting blade. Pausing occasionally for cooling is essential.
When not in use remove disc
To avoid damages, remove diamond blades from the machine during transit. Always war protective goggles, protective gloves, face mask, safety shoes and working clothes.
Protection guard, cutting guide and dust extraction to be used whilst working
Remove reduction ring for marble cutter application
Use reduction ring for angle grinder application
Only dry cutting for angle grinder application
Long lifetime in all stone cutting
Suitable for wet cutting in extremely hard stone when using a marble cutter
Safety product in EN norm 1323
Code: 2 608 615 055
Bore diameter: 20.00/16.00mm
Building materials: Marble, Granite
1 x 4" BOSCH Eco Stone Diamond Cutting Disc