FEATURES:
Diamond Eco Universal materials for concrete.
The right disc for the highest demands with regard to accurate, chip-free cuts
Ideal for general building materials such as concrete, masonry, brick and granite
Excellent cutting speed thanks to its optImised diamond components
Sintered in hot press diamond cutting segments
Safety product according to EN norm 13236
Good quality
DESCRIPTION:
Brand: BOSCH
Code: 2 608 615 025
Genuine Bosch Diamond Disc for Universal
Diameter: 105mm
Cutting width: 1.9mm
Segment height: 7
Bore diameter Wet: 20mm / Dry: 16mm
Max. speed: 14500min-1
Building materials for concrete, marble, granite, cellular concrete, clay brick, plaster / wall chasing, pumice, gypsum plaster, sand lime brick (medium), sandstone (medium), natural slate, artificial stone, lime flooring
For wet cutting, the electro-tool must be connected by means of an isolation transformer with a permanently installed socket without protective earth conductor
To set up or to change disc, pull plug out.
Use the correct cutting blade for the various material
Clean flange, spindle and cutting blade
Flanges should have at least 1/3 of cutting disc diameter
Diameter of spindle, and bore hole of the cutting blade must be the same. Bore hole of the cutting blade must not be enlarged
Arrow on the cutting blade and the direction of rotation of the machine msut be corresponding
Maximum rotation of the machine must not be faster as the allowed rotation of the cutting blade
Only work on right angle and on straight line. Curve cuts and edging may cause tears in the center or breaks of segments.
Avoid harsh starts and tilting blade while cutting. Do not overstrain the cutting blade. Pausing occasionally for cooling is essential.
When not in use remove disc:
To avoid damages, remove diamond blades from the machine during transit. Always war protective goggles, protective gloves, face mask, safety shoes and working clothes.
Protection guard, cutting guide and dust extraction to be used whilst working.
Remove reduction ring for marble cutter application.
Use reduction ring for angle grinder application.
Only dry cutting for angle grinder application.
1 X 4" Eco-Universal Diamond Cutting Disc